Finding a specific Barmark can be a tedious exercise when panning through a drawing doing a visual inspection. A much quicker and easier method is available using the standard Quick Select function in AutoCAD.
1.In AutoCAD, click on the Quick Select button in the properties window.
2.The Quick Select window will open. Apply the Quick Select to the entire drawing.
3.The Object type must be Rebar.
4.In the Properties menu, select the BarMark. Rebar can also be found by mean of other properties from the list.
5.Select Equals in the Operator menu.
6.Type in the BarMark name you wish to find in the Value box.
7.Click on OK
The BarMark you searched will be selected/highlighted.
The information contained in this article was compiled using AutoPadds 2017.